Parts

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance. KEY FEATURES - Recommended Use - Trail / All Mountain - Width - 800mm - Diameter - 31.8mm or 35mm - Rise - 20mm - Upsweep - 5 deg - Backsweep - 7 deg - Weight - 225g - Larger diameters around the bends to significantly increase the strength of the bars profile. - Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.

- Alloy cable ends - For 1.2mm to 1.6mm cables - Silver

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Use: Brake - Length: 30mm - Diameter: 5mm

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Saddle clamp heads and lowers for KS Dropper posts.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Replacement bearing for the lower half of YST8003 #7 headset.

FSA Mega Exo Small Parts.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Sunlite Cottered Pins

- 8x1mm Allen head

Brass compression olive for Hope hydraulic disc brakes.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed