Rear

- 9-speed compatible - SIS rear index shifting - Max: 34t - Cage: Mid - Ratio: 2 to 1

Shimano's Saint Rear Derailleur is packed with World Cup-worthy features, like an integrated skid plate, a urethane bump stop, and low-profile Shadow positioning, all of which protect your derailleur as you smash through rock gardens and overgrown singletrack. Shimano Plus Technology minimizes chain and impact noise, and maintains perfect chain tension so you can shift with precision and authority no matter how rough the terrain gets. The Saint Rear Derailleur also has a mode converter that lets you use either a close-ratio DH cassette, or a wider-ratio freeride cassette.

Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.

The GX Eagle Transmission derailleur is a lesser version of nothing. It delivers everything an Eagle Transmission derailleur possibly can, and then some. It features a revised battery position and a reconfigured gearbox to better protect itself from impacts. To maintain crisp shifting and striking appearance throughout its entire lifespan, hard-chargers can replace both its protective skid plates and two-piece outer link, if needed, making this the most repairable derailleur we’ve ever made. It also features the first ever tool-free cage and clutch assembly – so it’s both removable and upgradable too. With a steel inner cage that adds even more robustness, it’s been built for riders of the real world. Just like all Eagle Transmission derailleurs, it’s been engineered with a first-of-its-kind Hangerless Interface, mounting around the wheel axle itself and making direct contact with the cassette with no hanger required. The new transmission derailleurs feature the same intuitive pairing and set-up procedure as our Eagle AXS derailleurs. The revolutionary Full Mount attachment method creates a far stronger connection because it grips both sides of the frame. Let the record show that the GX Eagle Transmission derailleur plays second fiddle to nothing. It’s all in for all day. - Revised battery position, reconfigured gearbox, replaceable skid plates and outer link, tool-free cage and clutch - Install and pair via the reliable and familiar standard AXS set-up and pairing procedure - Hangerless Interface, Full Mount attachment method - Radically clear setup process, no adjustment required - AXS battery and Pod controller available separately

Incredibly fast, astonishingly quiet and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 191 grams. Plus, SRAM's WiFLi technology delivers a wider range of gears than your standard triple, faster shifts through two chainrings and every gear on the rear cassette, all with significant weight savings.

- 2:1 actuation ratio compatible with most Shimano 3x7/8sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster

- Alloy cage with adjustable chain stabilizer - Forged alloy links - 14t lower pulley and 12t upper pulley - Max rear sprocket is 50t with 1X setup; 42t with 2X - 10/11/12 speed compatible (Shimano 10/11 speed & SRAM 12 speed)

- Stable Shifting Performance - Pulley Follow-Up In Certain Distance - Shimano Shadow Rd Construction - Low Profile Rear Derailleur Design - Race Endurance For Less Damage In Crush - Adapted For Race Specific Frame Design - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience and shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain tensioner. - Adjustable chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Gravel-tuned clutch tension - Maximum front T difference: 16T - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 36T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 41T - Smooth and reliable mixed-surface shifting - Compatible with current 10s road DUAL CONTROL LEVER - Compatible with wide-range front gearing

• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible

- Model Number: RD-R3000-SS - Series: SORA - Maximum Sprocket: 32T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 37T

The Shimano Tourney rear derailleur offers smooth shifting with SIS and HyperGlide technologies for 7-speed drivetrains. - Maximum cog size: 28t - Total capacity: 37t

The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately

The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42

The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48

The Campagnolo Chorus 12-speed rear derailleur features 3D Embrace technology and 12-tooth pulley wheels making it suitable for all cassettes as the distance stays optimum on each individual sprocket, regardless of the cassette selected. - Embrace technology not only keeps the rear derailleur vertically aligned in the perfect position for each sprocket, it now makes the upper pulley wheel advance perfectly in the direction the bike is advancing - On rough roads, the spring positioned between the upper body and the pivot absorbs the vibrations, ensuring the chain always rests properly on the sprockets - The pulley wheels on the 12-tooth derailleur cage allow the chain to move more smoothly - The initial position of the rear derailleur can be adjusted to suit any cassette. - The rear derailleur is positioned further back, making it easier to slide the wheel out and replace it - Upper and lower body crafted from technopolymer that is reinforced with long carbon fiber for exceptional durability Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Weight: 240g

- 11-34T - Weight—354g

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation

Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.

SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage

The TR12 drivetrain system is the result of an intimate development relationship with 5x DH World Cup Overall Champion, Aaron Gwin, and his personal mechanic, John Hall. From start to finish, the project spanned more than two full years of conceptualizing to achieve this high-performance design. DERAILLEUR The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys SHIFTER Ergonomics are key to Aaron, which is why he wanted something a little different. As a result, TRP engineers looked at the cable release lever's ergonomics and devised a system to move it in a linear path to mimic the motion of a rider's thumb, rather than rotating it away. This unique positioning allows for a more consistent contact patch providing overall better grip and shifting performance when the trail gets rowdy. - Shift levers designed and located for optimum performance by Aaron Gwin - New linear actuation for improved ergonomics and consistent thumb contact - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 12 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T

Shimano Tourney TX is a basic 8-speed rear derailleur for entry-level sport bikes and riders. Enjoy durable, trouble free, and stable performance. - Maximum cog size: 34t - Total capacity: 43t

SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.

Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts

Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only